Model jet engines have gone through a lot of technological upgrades over the past few years, making these model jets more affordable and easier to fly. Radio controlled jets are a lot of fun to fly, but they are often prohibitively expensive, so customers will need to be aware of each aspect to prevent the aircraft from breaking. Listed below is a simple guide to the model jet engine.
In principle, jet engines have simple functions. Every engine has three major components, the Turbines, Combustion Chamber, and the Compressor. Air is taken from the atmosphere and led into the rotating compressor, where a set of fan blades will reduce the volume of the air, thereby compressing it. This compressed air is quite similar to the air you might find in a gas tank.
The compressed air is channeled into the combustion chamber, which has a constant amount of fuel flowing into it. This creates a very combustible atmosphere that would immediately ignite under a single spark. When the fuel combusts, it creates a constant flow of expanding and extremely hot gases. This heated gas goes over the turbine fan blades, causing them to spin.
Although model jet engines have simple functions, they have demanding structures and incredibly complex designs and materials. This can cause the price of this aircraft to become drastically higher than any other type of model plane. The average turbine jet costs in excess of 1000 dollars, and can cost up to 10,000 dollars, depending on the design and speed capability.
RC jets are certainly regarded as a premium performance aircraft. The same engine designs are popularly used in real commercial and military jets, except the scaling size is much larger. The sound is also very similar, and an average turbine jet can propel the craft to speeds of over 200 miles per hour when flying straight.
Most people had never heard of RC jets a few years ago, but now there are hundreds of different products available. With a growing market, there is a greater number of enthusiasts who host events and races dedicated to the these planes. Hobbyists enjoy going to these events to show off their aircraft and enjoy other planes as well. Flying this craft takes a lot of time and money, so these hobbyists devote a lot of time to this activity. If you want ideas on how to buy a model jet, these events are the best places to go to.
